Home
Flashing/Installation Tutorial
rofs2 - is also known as CFW of your phone so if you want to choose other CFW to your phone just simply change the rofs2 to the instructions below
Note: You must Have these Installed. optional for backuping files the nokia pc suit
JAF [You must be registered and logged in to see this link.]
pkey [You must be registered and logged in to see this link.]
Nokia PC suite [You must be registered and logged in to see this link.]
Dot net framework at least
netframe 2.0 [You must be registered and logged in to see this link.]
netframe 4.0 [You must be registered and logged in to see this link.]
Choose Phone Model
5530 (RM-504)
Rofs2: CodeShadow 1.5-5530.RM504v32.0.007c6v40.0.021.rofs2 [You must be registered and logged in to see this link.]
Core+Uda: (RM 504) 5530 v32.0.007 Core UDA [You must be registered and logged in to see this link.]
5800 (RM-356)
Rofs2: CodeShadow 1.5-5800.RM356v52.0.101c6v40.0.021.rofs2 [You must be registered and logged in to see this link.]
Core+Uda: (RM 356) 5800 v52.0.101 Core UDA [You must be registered and logged in to see this link.]
5230 (RM-588)
Rofs2: CodeShadow 1.5-5230.RM588v40.6.003c6v40.0.021.rofs2 [You must be registered and logged in to see this link.]
Core+Uda: (RM 588) 5230 v40.6.003 Core UDA [You must be registered and logged in to see this link.]
5233 (RM-625)
Rofs2: CodeShadow 1.5-5233.RM625v40.1.003c6v40.0.021.rofs2 [You must be registered and logged in to see this link.]
Core+Uda: (RM 625) 5233 v40.1.003 Core UDA [You must be registered and logged in to see this link.]
X6 (RM-559)
Rofs2: CodeShadow 1.5-X6.RM559v32.0.002c6v40.0.021.rofs2 [You must be registered and logged in to see this link.]
Core+Uda: (RM 559) X6 v32.0.002 Core UDA [You must be registered and logged in to see this link.]
Instructions
1. install [JAFSetup_1.98.62.exe]
2. open [OGM_JAF_PKEY_Emulator_v 5.exe]
3. on jaf click [BB5] and follow the picture
4. follow this picture
5. final lights should look like this. only 3 lights should be "ON" MCU, PPM and APE.
6. after that setup do this to your phone. on your phone's mmc, via card reader or usb, delete these. [private, system, sys, resource] then perform hard reset[dial *#7370#]
7. after hard reset you will see what country etc. on that state turn off your phone
8. then connect your phone to usb
9. click flash. warning sign pops up. click yes
10. searching for phone. click power button less than two second
WARNING this is the cause of all failure flashing
wait for the message FLASHING DONE
11. there should be a notification on JAF that flashing is done. (sound fx: ding) then unplug usb cable
12. hard reset [dial *#7370] then Normal restart (turn off then turn on) your phone to start mediabar/xpress music button.
rofs2 - is also known as CFW of your phone so if you want to choose other CFW to your phone just simply change the rofs2 to the instructions below
Note: You must Have these Installed. optional for backuping files the nokia pc suit
JAF [You must be registered and logged in to see this link.]
pkey [You must be registered and logged in to see this link.]
Nokia PC suite [You must be registered and logged in to see this link.]
Dot net framework at least
netframe 2.0 [You must be registered and logged in to see this link.]
netframe 4.0 [You must be registered and logged in to see this link.]
Choose Phone Model
5530 (RM-504)
Rofs2: CodeShadow 1.5-5530.RM504v32.0.007c6v40.0.021.rofs2 [You must be registered and logged in to see this link.]
Core+Uda: (RM 504) 5530 v32.0.007 Core UDA [You must be registered and logged in to see this link.]
5800 (RM-356)
Rofs2: CodeShadow 1.5-5800.RM356v52.0.101c6v40.0.021.rofs2 [You must be registered and logged in to see this link.]
Core+Uda: (RM 356) 5800 v52.0.101 Core UDA [You must be registered and logged in to see this link.]
5230 (RM-588)
Rofs2: CodeShadow 1.5-5230.RM588v40.6.003c6v40.0.021.rofs2 [You must be registered and logged in to see this link.]
Core+Uda: (RM 588) 5230 v40.6.003 Core UDA [You must be registered and logged in to see this link.]
5233 (RM-625)
Rofs2: CodeShadow 1.5-5233.RM625v40.1.003c6v40.0.021.rofs2 [You must be registered and logged in to see this link.]
Core+Uda: (RM 625) 5233 v40.1.003 Core UDA [You must be registered and logged in to see this link.]
X6 (RM-559)
Rofs2: CodeShadow 1.5-X6.RM559v32.0.002c6v40.0.021.rofs2 [You must be registered and logged in to see this link.]
Core+Uda: (RM 559) X6 v32.0.002 Core UDA [You must be registered and logged in to see this link.]
Instructions
1. install [JAFSetup_1.98.62.exe]
2. open [OGM_JAF_PKEY_Emulator_v 5.exe]
3. on jaf click [BB5] and follow the picture
4. follow this picture
5. final lights should look like this. only 3 lights should be "ON" MCU, PPM and APE.
6. after that setup do this to your phone. on your phone's mmc, via card reader or usb, delete these. [private, system, sys, resource] then perform hard reset[dial *#7370#]
7. after hard reset you will see what country etc. on that state turn off your phone
8. then connect your phone to usb
9. click flash. warning sign pops up. click yes
10. searching for phone. click power button less than two second
WARNING this is the cause of all failure flashing
wait for the message FLASHING DONE
11. there should be a notification on JAF that flashing is done. (sound fx: ding) then unplug usb cable
12. hard reset [dial *#7370] then Normal restart (turn off then turn on) your phone to start mediabar/xpress music button.
